QA662 User Guide
— 16 —
7.3 Turning off the Network Streaming
After exiting from the Network streaming to another input source, the
Network streaming will continue to work in the background for five minutes to
avoid accidental switching by the user.
Before turning off the entire power when network streaming is not yet
closed (including switching from network streaming to other inputs within 5
minutes), please make sure to put the machine into standby mode first through
the
key on the front panel or the remote controller. Then, you can turn off the
power switch at the rear or the system power. Failing to do so may damage the
firmware of the network streaming.
7.4 Accessing IP Address of Network Streaming
When needing to access the network streaming to check information or
perform other operations, you will need to enter the IP address of the device in
your browser and perform the operation after entering the system.
The current IP address can be obtained by the following two methods.
1) The IP address will be displayed in the upper right corner of the LCD
screen after successful startup.
2) During playback, press the
key to pause the playback and return to
the network streaming interface to check the IP address.
7.5 Common Control Methods
There are three methods, namely UPNP (DLAN), Airplay and Roon Bridge,
that we can use to push the streaming resources to QA662s Network streaming
for playing.
7.5.1 UPNP (DLAN) Streaming
Many music apps support casting to DLNA devices. Typically, the necessary
settings can be found on the song playback screen. Access the DLNA settings,
and set the output device to "QA662 UPnP."
7.5.2 Airplay (Apple Music)
To play a song via AirPlay, select the track, then open the playback controller
and click the "AirPlay" button. Choose "QA662 Airplay" from the device list that
appears. Ensure the volume of the Apple Music app is turned up.