QA662 User Guide
— 11 —
4.2.4 Coaxial
(Input)
It can be connected to other audio devices with coaxial output, and the
QA662 will enhance and output the improved signal quality.
4.2.5 Bluetooth
(Input)
After turning on the Bluetooth in your cell phone, select the device with the
name of " Quloos BT1.1"to pair, and if the device is not scanned or cannot be
paired successfully, please check whether there is another cell phone already
connected.
Please connect the Bluetooth receiving antenna, and make sure there is no
wall or other signal attenuating entity between the transmitter and the receiver.
5. Parameter Settings
5.1 Parameter Setting Method
Click the front panel
key to enter the setting page, then press
to
move the cursor to the item for setting parameter, and then press the
or
key to select the parameter value, and at last press the
key to exit and save
the setting after modification.
The same method applies to the remote controller.
5.2 Restoring Factory Settings
Click the front panel
key to enter the setting page, then press and hold
the
key for more than two seconds and then release it. After that, the
interface of "Restore Defaults?" will pop up. Click the
key to move the
cursor to the "Yes" button, click the
key to execute the operation, and finally
press the
key to exit.
5.3 Parameter Settings
5.3.1 Playback Mode
(valid for pure playback only)
Loop:
Sequential play from top to bottom, restarts after the last song.
Random:
Plays tracks randomly.
Once:
Sequential play from top to bottom, stops after the last song.
Invert:
Sequential play from bottom to top, restarts after the first song.
One:
Continuous play of the same song.
5.3.2 Playback Range
(valid for pure playback only)
All:
Play all supported formats on the entire SD card.
Folder:
Play files within the selected folder.