Refuel
|
uSeR MANuAl
|
V-o1 | PAGE 4
iMpORtANt SAfety
iNStRuctiONS / wARNiNGS
cAutiON
To reduce the risk of electric shock, do not
disassemble. Only remove the cover to access
the batteries. No user-serviceable parts inside.
Refer servicing to qualified service personnel.
wARNiNG
To reduce the risk of fire or electric shock, do
not expose this appliance to rain or moisture.
wARNiNG
To reduce the risk of electric shock, do not
perform any servicing other than that contained
in the operating instructions unless you are
qualified to do so.
cAutiON
Risk of explosion if battery is replaced by
an incorrect type. Dispose of used batteries
according to the instructions.
cAutiON
Wink devices connect by receiving flashing
light patterns that come from your phone’s
screen. Please note that a very small percentage
of individuals may experience epileptic seizures
when exposed to such light patterns or flashing
lights. If you have an epileptic condition,
consult your physician prior to using this app
to connect a device.
A NOte AbOut RecycliNG:
This product and its packaging materials are
recyclable. Please dispose of any materials in
accordance with the local recycling regulations.
When discarding the unit, comply with local rules
or regulations. This product and the supplied
accessories constitute the applicable product
according to the
WEEE
directive.
MOdificAtiONS diSclAiMeR
wARNiNG!!!
Changes or modifications not expressly approved
by the manufacturer could void the user’s
authority to operate the equipment.
Note: The manufacturer is not responsible
for any Radio or
TV
interference caused by
unauthorized modifications to this equipment.
Such modifications could void the user’s authority
to operate the equipment.
fcc cOMpliANce
This device complies with Part
15
of the
FCC
Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any
interference received, including interference
that may cause undesired operation.
Changes or modifications not expressly approved
by Quirky could void the user’s authority to
operate the equipment.
NOTE:
This equipment
has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part
15
of the
FCC
Rules. These limits are designed to
provide reasonable protection against harmful
interference in a residential installation. This
equipment generates, uses and can radiate
radio frequency energy and, if not installed
and used in accordance with the instructions,
may cause harmful interference to radio
communications. However, there is no guarantee
that interference will not occur in a particular
installation. If this equipment does cause harmful
interference to radio or television reception,
which can be determined by turning the
equipment off and on, the user is encouraged to
try to correct the interference by one or more of
the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment
and receiver.
Consult the dealer or an experienced radio/
TV
technician for help.
Rf expOSuRe StAteMeNt
To maintain compliance with
FCC
’s
RF
Exposure
guidelines, this equipment should be installed
and operated with minimum 20cm distance
between the product and your body. Use only
the supplied antenna.
ic wARNiNG
This device complies with Industry Canada
licence-exempt RSS standard(s). Operation is
subject to the following two conditions: (1) this
device may not cause interference, and (2) this
device must accept any interference, including
interference that may cause undesired operation
of the device.
This Class (*) digital apparatus complies with
Canadian ICES-003
Le présent appareil est conforme aux CNR
d’Industrie Canada applicables aux appareils
radio exempts de licence. L’exploitation est
autorisée aux deux conditions suivantes : (1)
l’appareil ne doit pas produire de brouillage,
et (2) l’appareil doit accepter tout brouillage
radioélectrique subi, même si le brouillage
est susceptible d’en compromettre le
fonctionnement.
Cet apareil numérique de la classe (*) est
conforme a la norme NMB-003 du Canada
