User Manual
January 2005
www.quintet.ie
Page 9
5
Selecting a Resource Pack
Before you use a particular resource pack you may need to transfer the music
from the associated memory card into the quintet. You will need to do this if:-
a) you are using the resource pack for the first time
b) you are switching from one resource pack to another
c) you recorded your own music over what was there and want to return to
the original music.
To transfer the music from a memory card into the Quintet
1. Make sure the Quintet is off.
2. Take the memory card out of it’s protective box and plug it into the slot at the
back of the Quintet. The text “QUINTET MEMORY CARD” should be facing
upwards.
3. Press and HOLD
Instrument
4. Turn on the Quintet whilst HOLDING
Instrument.
5. The
Instrument
light should come on immediately. If it does not you may not
have inserted the memory card properly. Switch off and try again.
6. Release
Instrument
7. The music from the memory card will be transferred into the Quintet. The
transfer is complete when the
Ready
and
Record
lights stop flashing.
Depending on how much music is stored on the memory card the transfer may take up to a
minute or more. On no condition should you turn off the Quintet while the transfer is taking
place. As the transfer is taking place the
Ready
light will flash while music is loaded from the
memory card. As it is stored inside the Quintet the
Ready
light will flash again but this time
with the
Record
light on also. This cycle will be repeated 10 times, once for each of the 10
songs. In other-words you should see the
Record
light come on and off 10 times.
8. Finally switch off the Quintet and remove the memory card, placing it back in
it’s protective box.
Useful tip:
If you only want to transfer the music for one song, choose the song
number before you turn on the Quintet and then press and HOLD both
Instrument
and
Record
in steps 3 and 4 above. Only the music for the selected
song number will be transferred into the Quintet.
