manualshive.com logo in svg

quint audio L16, Руководство пользователя

Поделиться
Скачать
quint audio L16 Скачать руководство пользователя страница 14

Picking up L16 rigs from a trolley

The easiest way to build, break down and transport a larger L16 array is to use 
the L1 dolly which fits 4 L16s and which also has room for a C1 cradle and C2 
T-bar.

Attach the front of  the L16 to 

the C1 cradle by inserting an 

L-pin through the E1 on both 

sides. The E1's on their turn 

have previously been attached 

to the C1 using the same pins, 

as well as the C2 T-bar.

At the rear, for each 

loudspeaker, place the first pin 

in the hole with the desired 

angle at which the L16 should 

hang from the cradle or the 

loudspeaker hanging directly 

above it.

Note that the first hook is the 

one that is attached to the C1 

cradle itself

quint audio

15

L16  

high performance arrayable loudspeaker

14

quint audio L16 manual 1.0/en

www.quintaudio.com

Adjust the angles, lift the rig so that the 
hooks fall into place and secure the 
hooks with L-pins.

Hoist the rig from its trolley and move 
the next trolley (if  more than 4 L16's 
are desired) directly underneath. 

Follow the interconnecting procedure 

for each subsequent L16. Start with the 

front attachment. 

18 degrees downwards looking of  the 

lowest hanging cabinet is the maximum 
angle to pick up a next fully lowered rig 

underneath.

!

CAUTION

18°

max

Содержание L16





























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды