Quinny Freestyle 3 XL Comfort, Инструкция по эксплуатации и гарантия

Страница: 12 / 16

GB
Cover
• Remove the pushchair seat from the Freestyle 3 XL Comfort (See Placing/removing the pushchair seat).
• Remove the safety bar (see Safety Bar section)
• To remove the cover, undo the poppers on the side (37,1).
• Loosen the straps under the seat and on the back (37,2).
• Open the cover (37,3).
• Remove the safety harness (see Safety Harness section).
• Remove the support plate from the back and seat (38).
• The cover, basket and pillow can be washed by hand in lukewarm water using a regular detergent (see
Washing instructions).
• To re-attach the cover, slide the board back in.
• Refasten all poppers and straps.
• IMPORTANT: Make sure the safety harness is secured properly.
• IMPORTANT: Never use the pushchair seat without the support plate.
Wheels
• Inflate the tyres to a maximum pressure of 28 PSI (1.8 Bar) using the pump supplied. Insufficiently
inflated tyres can lead to unnecessary wear and tear.
• If the inner tube has a puncture, you can repair it as you would a bicycle tyre or have it repaired at a
bicycle repair shop.
• Always deflate the tyres when taking the Freestyle 3 XL Comfort on an aircraft, as the tyres could burst
out due to the pressure difference.
• Clean the wheels regularly and remove all sand and dirt. Do not use oil, grease or cleaners.
Accessories
The following original accessories are available for the Freestyle 3 XL Comfort:
• Quinny carrycot
• Maxi-Cosi car seat
• Rain/wind cover
• Footmuff
• Support pillow
• Nappy bag
• IMPORTANT: The use of non-original accessories can have an adverse affect on the working of the
Freestyle 3 XL Comfort.
• IMPORTANT: Minor colour variation may occur between the pushchair and accessories and generally
does not constitute a reason for replacing the product once it has been used.
Questions
• Contact your supplier or importer (see address on the back).
INSTRUCTIONS FOR USE
12 /