Page 2
For technical questions, please call 1-888-866-5797.
Item 58628
Specifications
Torque Range
80 - 160 ft-lb
Presets
5 Presets (80, 100, 120,
140, and 160 ft-lb.)*
Drive
1/2″
Accuracy
± 4%
*
Note
: User is unable to achieve torque values between these preset values.
Important Safety Information
WARNING Read all safety warnings
and instructions.
Failure to follow the warnings and
instructions may result in injury.
Save all warnings and instructions
for future reference.
1. Wear ANSI-approved safety
goggles during use.
2. Do not use for loosening fasteners.
3. Use only within rated torque range.
4. Use as intended only. Do not
use as hammer or pry bar.
5. Do not use handle extension to increase
force. Do not use as a breaker bar.
6. Do not use a Torque Wrench that
has been dropped. Have it tested
before putting back into use.
7. Have the Torque Wrench calibrated and
serviced only by a qualified technician.
8. Inspect before every use; do not use
if damaged or if parts are loose.
9. Keep away from children.
10. Use only sockets with the correct
drive and rated to at least the
torque that will be applied to it.
11. The warnings, cautions, and instructions
in this instruction manual cannot cover all
possible conditions and situations that may
occur. It must be understood by the operator
that common sense and caution are factors
which cannot be built into this product,
but must be supplied by the operator.
Operating Instructions
1. Pull back cover outwards to
unlock Torque Handle.
2. Hold the Body of the Wrench and turn
Handle clockwise or counterclockwise
to set the desired preset torque.
3. Push the back cover inward
to lock Torque Handle.
Note:
Failure to relock Torque Handle
before using Torque Wrench may result
in damage to inner mechanism.
4. Apply steady force to the center of
the Handle, and stop applying force
when you hear a “click” sound.
