Quincy QMD 120, Инструкция

Страница: 88 / 92

14 Pressure Equipment Directives
Components Subject to Pressure Equipment Directive 2014/68//EU
Parts of article 4.3 of 2014/68/EU are subject to Sound Engineering Practice (SEP).
Parts of category I according to 2014/68/EU are integrated into the machine and fall under the
exclusion of article I, section 2-(f)-(i).
Below table contain the necessary information for the inspection of all pressure equipment of
category I according Pressure Equipment Directive 2014/68/EU.
Tube drawing
p.n. Design
pressure
bar(e) Design
temperature
°C PED
category Tube wall
thickness
mm Tube
diameter
mm Tube
internal
volume
l
1627 6307 91 14 -10 to +66 I 5 150 9.8
1627 6307 92 14 -10 to +66 I 5 150 10.5
1627 6307 93 14 -10 to +66 I 5 150 13.6
1627 6307 94 14 -10 to +66 I 5 150 16.8
1627 6307 95 14 -10 to +66 I 5 150 19.5
1627 6307 96 14 -10 to +66 I 5 150 24.7
Recommendation of the manufacturer for the re-inspection time
Following actions are to be executed by authorized service personnel, unless stated differently in
the applicable legislation. The stated time interval has as reference the day of start-up of the unit.
• Every 6 months: visual check of the vessel material on the outside (exposed) for traces of
strong corrosion. Consult the service department of your supplier if necessary.
• Every 5 years: when replacing the desiccant, following inspections are to be carried out:
• Inspection of outside and inside of the material for excessive and local corrosion,
• Inspection of outside and inside of the material for fissures, leaks, damage.
Consult the service department of your supplier if necessary.
• Every 10 years: hydrostatic test according to the Pressure Equipment Directive 2014/68/EU.
Consult the service department of your supplier if necessary.
Instruction book
86 2920 7111 40