Quincy Compressor HP 15, Руководство по эксплуатации и техническому обслуживанию

Страница: 29 / 44

ENGLISH
.
Cod. 9828093052 04 - Edition 02/2018 - 29
15.0 ORDINARY MAINTENANCE TO BE DONE BY THE USER
BEFORE CARRYING OUT ANY MAINTENANCE IT IS OBLIGATORY TO STOP THE MACHINE AND DISCONNECT IT FROM
THE POWER MAINS AND FROM THE COMPRESSED AIR DISTRIBUTION NETWORK.
The maintenance jobs described in this chapter may be carried out by the user.
The more complex maintenance jobs which require professionally skilled personnel are listed in the chaper on GENERAL ROUTINE
MAINTENANCE. (See Chap. 21.0)
15.1 GENERAL INFORMATION
15.2 MAINTENANCE PROGRAMME
 OPERATIONS THAT MAY BE CARRIED OUT BY THE USER
 OPERATIONS THAT REQUIRE SKILLED PERSONNEL; THESE OPERATIONS ARE ILLUSTRATED IN PART B OF THIS
MANUAL.
These maintenance intervals are recommended for work environments that are not dusty and are will ventilated. For particularly dusty
environments, double the frequency of controls.
Every Day  Purge condensate water from air receiver
Every 50 working hours
 Observe for unusual noise or vibration

Drain condensate from the oil tank

Check the oil level

Clean the filtering panel (VSD)
 Clean the filter of the automatic discharge of condensate (dryer)
 Check air receiver automatic drain (if applicable)
Every 500 hours
 Fixing electrical cables (at first 500 hrs)
 Clean the air suction filter

Clean the condenser battery (on the dryer if fitted)

Clean the dirt collection filter
 Check automatic condensation emptying (dryer)
 Clean the water separator drain
Every 2000 hours
 Clean the filtering panel (VSD)
 Clean the air suction filter

Clean the air filters
Every 4000 hours
 
Maintenance kit of the automatic condensate drain (dryer)
 
Clean the finned surface of the air-oil cooler

Change the filtering panel (VSD)
  Replace the oil separator cartridge
  Change the oil filter

Change the air filters

Change the air suction filter
 
Retighten all power cable connections
  Safety temperature test
Every 8000 hours
  Change the oil (

)
  Kit revision intake valve
  Checking the status of the oil return valve and oil pipes
 
Kit revision minimum pressure valve
 
Kit revision thermostatic valve
  Replace drain
Every 24000 hours
 
Kit revision of the compressor unit
  Kit revision of motor (bearings)
(

) Or as indicated by oil analysis.
Oil specifications:
It is strongly recommended to use genuine lubricants from your manufacturer. They are the result of years of field experience and research.
See section Preventive maintenance schedule for the advised replacement intervals and consult the Spare Parts list for part number
information.
AVOID MIXING LUBRICANTS OF DIFFERENT BRANDS OR TYPES AS THEY MAY NOT BE COMPATIBLE AND THE OIL
MIX MAY HAVE INFERIOR PROPERTIES.