Quilt EZ BUTLER, Руководство по сборке

Страница: 15 / 27

Page 15
3
Remove the front face-
plate of the stitch regula-
tor.
Loosen the screw for the
terminals labeled start,
GND, and SS.
Connect the ground
(green) from both Needle
Up and Start/Stop cables
into the GND port.
Connect the control wire
from the Start/Stop wire
into Start terminal.
Connect the control wire
from Needle Up cable
into SS terminal.
Reattach the faceplate.
Run the handlebar
cable along the base of
the carriage to the back
handlebars.
2