Press SPEED button for 3 seconds to select your desired wind type: Speed + NATURAL or
Speed + SLEEP (Variable). The indicator light will show the selected wind type.
Speed +NATURAL : The fan speed alternates between High, Middle, Low and Off to mimic a
natural breeze.
Speed + SLEEP :This mode is for comfort during the night. When the SLEEP mode is selected,
the airflow will randomly vary between High, Middle,Low as below.
H+SLEEP: Running at Highspeed for 30 mins, then change to middle speed for 30mins, and
then Low speed until the unit is switched off.
M+SLEEP: Running at middle speed 30mins then change to low speed until the unit is
switched off.
L+SLEEP: Running at low speed until the unit is switched off.
Swing Button:
Vertical air direction -- Press the SWING button and ‘SWING’ indicator light will turn on and the
louvers will begin to move left to right automatically. Press SWING button again, the louver will
stop moving and theindicator light will turn off.
Horizontal Air direction- You can manuallyadjust the louvers to change the horizontal airflow.
Timer Button:
Press the TIMER button, the display screen will display 0 hr,press the TIMER button once
again, and the time increases by 1hr until the desired time duration setting is selected. When
the set time has passed, the unit will automatically turn off. The TIMER function allows you to
program the unit up to 8 hours.
UV button
Press UV/replace button to turn on the UV light, press the UV/replace button again to turn off
the UV light.
Mode button:
When the water in the tank is abovethe minimum level, press the MODE button to control
cooling with the cooling icon lights on or off.
Whenthe water in the tankis belowthe minimum level, press the MODE button and the cooling
icon light will flash with soundsa beep.
Press the mode button againto deactivate.
Auto button:
Press the Auto button to run the unit in Auto mode as explained below :
When temperature is
≤
20°
(
68F
)
, the unit runs at low speed, when the temperature is
between > 21~25°
(
70~77°F), the unit runs at mid speed, when temperature >25°(77°F), unit
runs at high speed.
When the water in the tank is above the minimum level, and when the detected humidity level
is less than the last humidity setting
，
the water pump works automatically.
When the detected humidity level is more than the last humidity setting, the water pump stops
working automatically.
Press the Auto button again to quit Auto mode.
10
