quiko SPIDER QK-S400KIT, Руководство по эксплуатации и обслуживанию, Страница: 5 / 22

5
E
N
G
L
I
S
H
USE OF THE CONNECTORS OF THE MOTORS
The motors are supplied with a removable connector. (see the label on the above image).
Terminals No 0-1-2-3 are used for the limit switches connection.
Terminals No 4-5-6 are used for the motor power supply.
Adjust the limit switches cammes according to the leaves opening angle.
The limit switches intervention shut off the motor.
USE OF MANUAL UNLOCKING
1- Remove the cap from the cover; 2- Insert the special key(supplied) into the square insert and turn: 2a - 180° counter clockwise for the
operator installed on the right side;
2b - 180° clockwise for the operator installed on the left side.
ELECTRICAL CONNECTIONS
1 – Connect cables with at least 1.5 mm2 section to the control board, checking the motor’s rotation direction and remembering that:
the yellow-green wire = ground / blue wire = common / black wire = phase / brown wire = phase
2 – Connect the provided capacitor in parallel with the motor’s phases.
USE OF THE CONNECTORS OF THE MOTORS
The motors are supplied with a removable connector. (see the label on the above image).
Terminals No 0-1-2-3 are used for the limit switches connection.
Terminals No 4-5-6 are used for the motor power supply.
Adjust the limit switches cammes according to the leaves opening angle.
The limit switches intervention shut off the motor.
USE OF MANUAL UNLOCKING
1- Remove the cap from the cover; 2- Insert the special key(supplied) into the square insert and turn: 2a - 180° counter clockwise for the
operator installed on the right side;
2b - 180° clockwise for the operator installed on the left side.
ELECTRICAL CONNECTIONS
1 – Connect cables with at least 1.5 mm2 section to the control board, checking the motor’s rotation direction and remembering that:
the yellow-green wire = ground / blue wire = common / black wire = phase / brown wire = phase
2 – Connect the provided capacitor in parallel with the motor’s phases.