TYPICAL CONNECTION AND CABLE SECTION
2X1,5mm2 (24 Vdc )
4X1,5mm2 (230 Vca )
2X0,75mm2
4X0,75mm2
4X0,75mm2
2X0,75mm2
CONSIDERATIONS FOR INSTALLATION
INSTALLATION
1. Before fastening the plates provided,
establish the coordinates using the data
given in
Table 1
in accordance with the
wing opening angle
(see Fig. 1)
.
2. Fasten the support plate of the motor
firmly.
20mm
A
90° OPENING
120° OPENING
A
13 cm
A
19 cm
B
30 cm
Table 1
RX Photocell
TX Photocell
3X1,5mm2
230V Line
!
The installation and testing operations must be performed solely by qualified
personnel in order to guarantee the proper and safe operation of the automatic gate.
!
The company declines any responsibility for damage caused by incorrect
installations due to incompetence and/or negligence.
!
Before assembling the automatism, check that the gate is in perfect working
order, hangs well on its hinges and is suitably lubricated. It must also comply
with the safety standards in force in the country of installation.
