Operation Manual - Port
Quidway S3000-EI Series Ethernet Switches
Chapter 1 Ethernet Port Configuration
Huawei Technologies Proprietary
1-3
a port to forward data any more, use the command to
disable it.
enable the port. If you do not want
Perform the following configuration in Ethernet port view.
Table 1-2
Enable/Disable an Ethernet port
Operation
Command
Disable an Ethernet port
shutdown
Enable an Ethernet port
undo shutdown
B
1.3 Set Description Character Strin
et Port
To distinguish the Ethernet ports, you can use the following command to make some
Table 1-3
Set description character string for Ethernet port
y default, the port is enabled.
g for Ethern
necessary descriptions.
Perform the following configuration in Ethernet port view.
Operation
Command
Set description character string for Ethernet port.
description
text
Delete the description character string of Ethernet.
undo
description
By default, the port des
ull character string.
1.3.1 Set D
o configure a port to send and receive data packets at the same time, set it to
plex. To configure a port to either send or receive data packets at a time, set it to
ode, the local and peer ports
will automatically negotiate about the duplex mode.
ort view.
cription is a n
uplex Attribute of the Ethernet Port
T
full-du
half-duplex. If the port has been set to auto-negotiation m
Perform the following configuration in Ethernet p
Table 1-4
Set duplex attribute for Ethernet port
Operation
Command
Set duplex attribute for Ethernet port.
duplex
{
auto
|
full
|
half
}
Restore the default duplex attribute of Ethernet port.
undo duplex
