Operation Manual - Port
Quidway S3000-EI Series Ethernet Switches
Chapter 1 Ethernet Port Configuration
Huawei Technologies Proprietary
1-12
II. Networking diagram
Switch A
Switch B
Figure 1-1
Configure the default VLAN for a trunk port
I. Configuratio
II
n procedure
ons are used for Switch A. Please configure Switch B in the
et0/18.
k port and allows VLAN 2, 6 through 50, and 100 to
pass through.
[Quidway-Ethernet0/18] port trunk permit vlan 2 6 to 50 100
[Quidway] vlan 100
[Quidway-Ethernet0/18] port trunk pvid vlan 100
1.6 Ethe
ng
LAN ID configuration failed.
k if the port is a
ort. If it is neither of them, configure it as a trunk port or a
e default VLAN ID.
The following configurati
similar way.
# Enter the Ethernet port view of Ethern
[Quidway] interface ethernet0/18
# Set the Ethernet0/18 as a trun
[Quidway-Ethernet0/18] port link-type trunk
# Create the VLAN 100.
# Configure the default VLAN ID of Ethernet0/18 as 100.
rnet Port Troubleshooti
Fault: Default V
Troubleshooting: Take the following steps.
z
Execute the
display interface
or
display port
command to chec
trunk port or a hybrid p
hybrid port.
z
Then configure th
