Starboard Side Control
Module Cable Installation
All Outboard
Models
thru
250 (3
Litre)
Before tightening cable fastener locknut, be sure that
pin on end of cable fastener is completely thru cable
end and shift/throttle lever. A pin, that is partially thru
cable and lever, may cause fastener to bend when
locknut is tightened.
Shift Cable
a - Locknut (Cable Fastener)
b - Cable Fastener
c - Shift Cable
d - Cable Anchor Barrel
Torque shift cable fastener locknut to 20 to 25 lb. in.
(2.3 to 2.8 N.m).
Throttle Cable
a - Throttle Anchor Barrel
b
-
Throttle Cable
c - Cable Fastener
50030
d - Spacers (From Parts Bag)
e - Cable Fastener Locknut
Torque throttle cable fastener locknut to 20 to 25 Ibs.
in. (2.3 to 2.8 N.m.)
a - Access Cover
b - Cable Retainer
c -
Screws
50030
Position access cover and cable retainer onto back of
control and secure both with 2 screws. Torque screws
to 60 lb. in. (7 N.m).
-
7
-
