manualshive.com logo in svg

QuickLabel Systems QL800, Руководство пользователя, Страница: 28 / 122

Поделиться
Скачать
QuickLabel Systems QL800 Скачать руководство пользователя страница 28

Getting Started

14

QL-800 User Guide

2

Slide in the ink cartridge, nozzle end first, label side up. Push the cartridge in all the 
way.

You will feel slight resistance near the end of this process as the nozzle engages 
the ink needles inside the printer. Repeat this step for each color.

Caution: 

There are sharp needles in the ink cartridge slot. Never put your fingers 

in this area.

Note: 

The printer is designed so that ink cartridges cannot be inserted in the 

wrong slots. Do not attempt to insert ink cartridges in the wrong slots.

3

Close the ink cartridge latches. Then close the main side door.

Installing the Printhead

Use the following instructions to install the printhead.

Caution: 

The printhead is sensitive to electrostatic discharge (ESD). Use ESD 

protection when handling the printhead.

Caution: 

Do not touch the printhead cartridge ink couplings, nozzle surface, or the 

electrical contacts when installing the printhead cartridge. Hold the printhead cartridge 
ONLY by the handles.

Caution: 

To avoid drying out the printhead, do not open the printhead packaging until 

you are ready to use it.

Caution: 

Open the printhead packaging over an appropriate receptacle to safely 

capture any excess shipping fluid.

1

Ensure the printer is powered on and the ink cartridges have been installed.

2

Open the top cover.

Содержание QL800



























































































































Отзывы:

Нет отзывов