6
5.1 Iron Holder and Sponge
CAUTION:
●
The sponge is compressed. It will swell when moistened with water. Before using
the station, moisten the sponge with the water and squeeze it dry. Failure to do so
may result in damage to the soldering tip.
●
If the sponge becomes dry during working, add appropriate water.
1.
Dampen the cleaning sponge with water and then squeeze it dry.
2.
Place it in groove of the iron holder base.
3.
Add a little water to holder base. The sponge will absorb water to keep the sponge
around it wet at all times.
5.2 Connection
CAUTION:
Be sure to turn off the power switch before connecting or disconnecting the
soldering iron.
1.
Connect handle cord to the handle socket (4).
2.
Place the soldering iron into the iron holder.
3.
Connect power plug to power supply socket (6).
Soldering iron holder
Sponge
Holder base
