16
GB
TCD1044 D - REV002A
ELECTRIC CONNECTIONS
The remote control complies with EMC standards (electromagnetic compatibility) but requires correct installa-
tion to avoid compromising its performance and that of the surronding instruments.
For this reason the remote control wires must be positioned at a distance of at least:
• 1 m away from cables that carry radio signals (except SSB radio transmitters).
• 2 m away from cables for SSB radio transmitter signals.
Follow the rules below to construct the electrical installation relative of the remote control:
• Connect the remote control connectors to the connectors coming from the thrusters.
• Put in a switch, to turn on and shut off the remote control (not provided).
• Position the switch so that it is within easy reach should it be necessary to shut off the remote control in an
emergency.
• Insert a 8A quick-acting fuse on the remote control power supply line (not provided).
• Use wires, for the remote control power supply, with a correct cross section according to their length.
• Do not use supply from the motors or thrusters battery circuit for the remote control.
• Before switching on the power to the remote control, check that all the electrical connections are correct.
INSTALLATION
ELECTRICAL CONNECTIONS DIAGRAM
THRUSTERS
BATTERY
RED
BLACK
MOTOR
SERVICE
BATTERY
BATTERY
ISOLATOR
SWITCH
FUSE
*
*
* Common negative for the battery groups.
FUSE
MOTOR
BATTERY
ISOLATOR
FUSE
BOW THRUSTER
STERN THRUSTER
CONTROL CABLE
EXTENSIONS
(OPTIONALS)
Содержание TCD 1044 D
Страница 2: ......
