41
EN
INSTALLATION AND USE MANUAL
QUICK MC²X 16k - 16k LV
- REV001E
16k - 16k LV
7 - Installation procedures
• For tightening, use a
power drill
to tighten the Phillips head screws.
• Tighten gradually in a criss-cross pattern.
• Use suitable locking systems.
WARNING: Approximately one week after installation, check screws/nuts for proper tightening.
Periodically check the tightening of the screws for potential settling adjustments.
7.3 - Securing
Use the template supplied to mark the anchoring points before positioning the gyroscope.
•
Quick
®
MC
2
X 16k
shall be secured by means of screws with strength class no less than 8.8,
Tightening torque
70 Nm - M10
(the screws are not supplied with the product).
BOW/STERN
BOW/STERN