DP
Series
EN
DP
Series
QUICK
DPSeries
INSTALLATION AND USER’S MANUAL - REV000A
8
2 - Supply and equipment
2.0 - Standard supply and material included in the package
• Windlass (top+gearmotor)
• Reversing contactor box for DP1/DP2 300-500W
• Contactor box for DP2/DP3 700-1000W
• Base gasket
• Lever
• Screws for assembly, top/gearmotor
• Installation and user’s manual, Warranty
• Drilling template
2.1 - Tools required for installation
DP1
• Drill with bit: Ø 9 mm (23/64”) and Ø 11 mm (7/16”)
• Hole saw Ø 46 mm (1” 13/16) and Ø 62 mm (2” 7/16)
• Hex wrench: 13 mm
DP2
• Drill with bit: Ø 9 mm (23/64”) and Ø 11 mm (7/16”)
• Hole saw Ø 51 mm (2”) and Ø 64 mm (2” 1/2)
• Hex wrench: 13 mm
DP3
• Drill with bit: Ø 9 mm (23/64”) and Ø 16 mm (5/8”)
• Hole saw: Ø 65 mm (2”9/16) and Ø 67 mm (2”5/8)
• Hex wrench: 13 mm
2.2 - Recommended Quick
®
accessories not included
• Controls for control board (WCS 820 - WCS B - WCS 830)
• Waterproof push-button panel (HRC 1002)
• Foot switch (900)
• Hydraulic-magnetic circuit breaker (WCB)
•Anchor chain counter (CHC 1103 - CHC 1203 - QNC CHC)
•Control system via RRC radio (R02 - P02 - H02)
3 - Introduction
BEFORE USING THE PRODUCT, PLEASE READ THIS USER’S MANUAL CAREFULLY. IF IN DOUBT, PLEASE CONSULT YOUR QUICK® DEALER.
3.0 - Important notes
This manual features Warning and/or Caution symbols that are important for safety.
Please follow the instructions provided.
Warning
symbol indicating
dangerous situations.
Caution
symbol to prevent direct or
indirect damage to the product.
This manual provides boat manufacturers and nautical equipment installers with instructions on how to assemble the specified
Quick®
product and operate it correctly
.
