DP
Series
EN
QUICK
DPSeries
INSTALLATION AND USER’S MANUAL - REV000A
7
1.3 - DP3 Technical Data
MODELS
DP3 P - / D
MODEL POWER
700W
1000W
Motor voltage
12V
24V
12V
24V
Maximum instantaneous pull
850 kg (1873.9 lb)
1000 kg (2204.6 lb)
Maximum work load
250 kg (551.1 lb)
300 kg (661.4 lb)
370 kg (815.7 lb)
450 kg (992 lb)
Work load
80 kg (176.4 lb)
100 kg (220.5 lb)
120 kg (264.5 lb)
150 kg (330.7 lb)
Current consumption at work
load
(1)
90 A
55 A
140 A
80 A
Maximum recovery speed
(2)
27.4 m/min (89.9 ft/min) 26.4 m/min (86.6 ft/min) 39.6 m/min (129.9 ft/min) 40.9 m/min (134.2 ft/min)
Recovery speed at work load
(2)
14.4 m/min (47.2 ft/min) 14.8 m/min (48.5 ft/min)
20.4 m/min (66.9 ft/min)
21.4 m/min (70.2 ft/min)
Minimum motor cable cross
section
(3)
25 mm² (AWG3)
10 mm² (AWG7)
35 mm² (AWG2)
16 mm² (AWG5)
Circuit breaker
(4)
50 A
40 A
80 A
50 A
Deck thickness
(5)
25 ÷ 50 mm (63/64” ÷ 1” 31/32)
Weight-model without drum
16.4 Kg (36 lb)
17.4 Kg (38 lb)
Weight-model with drum
18.4 Kg (40 lb)
19.4 Kg (42.2 lb)
MODELS
DP3 - / D
MODEL POWER
1500W
Motor voltage
12V
24V
Maximum instantaneous pull
1100 Kg (2425.1 lb)
Maximum work load
470 kg (1036.2 lb)
540 kg (1190.5 lb)
Work load
160 Kg (352.7 lb)
180 kg (396.8 lb)
Current consumption at work load
(1)
155 A
85 A
Maximum recovery speed
(2)
29.2 m/min (95.8 ft/min)
29.7 m/min (97.4 ft/min)
Recovery speed at work load
(2)
16.3 (53.5 ft/min)
19.0 (62.3 ft/min)
Minimum motor cable cross section
(3)
50 mm² (AWG0)
25 mm² (AWG7)
Circuit breaker
(4)
100 A
50 A
Deck thickness
(5)
30 ÷ 50 mm (1” 3/16” ÷ 1” 31/32)
Weight-model without drum
21.3 Kg (46 lb)
Weight-model with drum
23.2 Kg (51 lb)
(1) After an initial period of use.
(2) Measurements taken with a gypsy for 8 mm chain
(3) Minimum recommended value for total length L= <20 m.
Determine the cable cross section according to the length of the wiring.
(4) With specific circuit breaker for direct current (DC) and delayed circuit breaker (thermal-magnetic or hydraulic-magnetic).
(5) On request, shafts and studs can be supplied for greater deck thicknesses.
GYPSY (*)
8 mm - 5/16”
10 mm- 3/8”
Chain size
8 mm
8 mm
5/16”
5/16”
10mm
3/8”
DIN 766
ISO
G4
BBB
ISO (P.30)
G4
Rope size*
1/2” (12.7 mm) - 9/16” (14.2 mm) - 5/8” (15.8 mm)
5/8” (15.8 mm)
*The values in the table apply to the combination of rope and chain according to the Quick
®
system, we do not guarantee the
correct operation with other anchor-rode types.
1 - Information about the product
