Quick BTQ 110, Инструкция по установке и эксплуатации

Страница: 12 / 24

BTQ Series
EN
QUICK BTQSeries INSTALLATION AND USER’S MANUAL - REV003A
12
4.3 - BTQ 110/125 Gearleg and motor support flange
• Fit the gearleg with the special seal gasket.
SILICONE
• For further protection against the entry of water, apply
silicone for nautical use around the point of contact between
flange and tube.
• Fasten everything with the flange using the special screws
and washers.
• Insert the motor on the flange by coupling the two elastic
coupling halves. Secure with the 4 screws and washers
supplied.
4.3.0 - BTQ110/125 Propeller assembly
• Insert propeller A on the shaft of gearleg B, secure the
propeller with the self-locking nut C, insert anode D and lock it
with the other self-locking nut C.
A
C
C D
B
8
9
7 5
4
6
1
2
3
12
9
8
8
10
WARNING: on conclusion of assembly, make sure
that the propeller is exactly positioned at the central
point of the tunnel.
4 - Installation
ELASTIC
COUPLING
HALVES
ELASTIC
COUPLING
HALVES