Quick BTAC 5131000, Руководство пользователя

Страница: 5 / 24

5
INSTALLATION AND USE MANUAL BTAC SERIES - REV000A
BTAC Series
EN
2 - Supplied parts
2.0 - Fornitura di serie e materiale incluso nella confezione
• AC Thrusters
• Drilling template
• Gasket
• O-ring (for assembly) - (only 250-300-513)
• User’s manual
• Conditions of warranty
2.1 - Needed tools for installation
BTAC 250 • Drill and drill bits Ø 11 mm (7/6”) • Hole saw Ø 46 mm (1” 13/16)
• Hex keys 4 mm, 5 mm, 8 mm e 10 mm • wrench 24 mm
BTAC 300 • Drill and drill bits Ø 15 mm (19/32”) • Hole saw Ø 53 mm (2” 3/32)
• Hex keys 4 mm, 5 mm, 8 mm e 12 mm • wrench 27 mm
BTAC 386 • Drill and drill bits Ø 16 mm (4" 5/8) • Hole saw Ø 120 mm (4" 23/32)
• Hex keys 4mm, 6mm 5 mm, 8 mm e 14 mm • wrench 27 mm
BTAC 513
• Drill and drill bits Ø 18 mm (45/64”) • Hole saw Ø 140 mm (5” 33/64)
• Hex keys 5 mm, 8 mm e 14 mm • wrench 32 mm
2.2 - Quick
®
recommended accessories
• TCD 1022 • AC POWER
• TCD 1062 • INVERTER
• TCD 1042 • AJ1
• TCD 1044 • PCS TJ1
• PCS TJ2
• PCS TJ3
• PCS DTW
3 - Introduction BTAC series
This document contains the instructions that are necessary for boat manufacturers and
marine equipment installers to assemble and commission the Thrusters.
Warning symbol concerning hazardous
situations.
Caution symbol to avoid direct or
indirect damage to the product.
This manual contains Warning and/or Caution symbols that are important for safety.
Comply with the recommendations provided herein.
3.0 Important notes
F
PROCEEDING WITH THE INSTALLATION IN GOOD LIGHT CONDITIONS.
We recommend using an appropriate personal protective equipment.
Quick
®
thrusters are not suitable for installation in potentially explosive environments and/or atmospheres.
Assembly and subsequent checks or repairs must only be carried out by qualified personnel.
3.1 Precautions for the installer