Quick BTAC 5131000, Руководство пользователя

Страница: 16 / 24

16
INSTALLATION AND USE MANUAL BTAC SERIES - REV000A
EN
BTAC Series
6 - Connection diagram
3 380...690 Vac
F
Use shielded cables to connect the inverter
to the motor.
*this data refer to S3 operating mode (periodic intermittent duty) - for any modification please contact Quick
MOTORE
MODEL
MOTOR
POWER
VOLTAGE
INVERTER
POWER
ABSORPTION ON
GENERATORS*
BT250AC200 15 kW 400 V 15 kW 19 kW
BT300AC300 15 kW 400 V 15 kW 21 kW
BT300AC350 22 kW 400 V 22 kW 27 kW
BT386AC420 30 kW 400 V 37 kW 35 kW
BT386AC460 37 kW 400 V 37 kW 40 kW
BT513AC1000 75 kW 400 V 75 kW 90 kW
7 - Warnings BTAC series
NOTE: the bow thruster must be installed with
the RH propeller on the right-hand side of the
gearleg (see figure).
RH
WARNING: This thruster is not designed for a continuous use. It is equipped with protections which limit its operation at
a maximum time span, as reported on the controls’ manual.
It is strongly forbidden to bypass or modify such protections in order to increase the operating time span, under pain of
voiding the warranty and thus lifting any responsibility from Quick
WARNING: Make sure no swimmers or floating objects are in the vicinity before switching on the thruster.
WARNING: There must not be flammable materials in the peak or in the area where the Thruster motor is.
WARNING: Do not operate the bow thruster out of the water for more than 10 seconds.
WARNING: During docking, it is recommended not to leave in the water any free rope, which may be sucked in by the propellers,
thus leading them to break.
7.0 - Warnings