USER MANUAL
8
1.
Remove 3 screws
①
.
2.
Pull the holder
⑤
with heating element
③
and steel tube
②
out of
the handle
⑥
.
3.
Disconnect the yellow and orange cables from the heating
element
③
.
4.
Remove the screw on the steel pipe
②
.
5.
Disconnect green ground wire from steel pipe
②
.
6.
Pull out steel pipe
②
.
7.
Check the holder
⑤
for damage.
8.
Detach heater insert
③
from plug
④
.
9.
Remove heating element
③
.
10.
Install new heating element.
11.
Insert plug into holder and slide steel pipe over it.
12.
connect green ground wire and screw on.
13.
push everything back into the handle and fasten with 3 screws.
14.
perform the following test:
15.
Perform calibration.