USER MANUAL
6
2.5.5 Memory locations
With a short press on a memory key, the memory location is selected.
With a long press on the memory key, the currently set temperature and air
volume is stored on it.
2.5.6 Standby
When the hot air piston is in the tray and the temperature is <100°C, the
station switches to standby. As soon as the hot air piston is removed from the
tray, the station is in working mode.
2.5.7 Password
If the default password 000 is not changed, settings can be changed.
If the password has been changed, then it must be entered before the settings
can be changed:
1.
switch off station
2.
Press and hold
▲
/
▼
at the same time and switch on the station.
3.
Control tone is heard, C is displayed briefly.
4.
The display shows --- The password can be entered with the rotary
control and the
▲
/
▼
keys.
5.
Press
▲
/
▼
simultaneously = confirmation.
6.
-1- is displayed confirm again
7.
The station is in working mode again and changes can be made to
the settings.
2.6.
Change password
1.
switch off the station
2.
press and hold
▲
/
▼
simultaneously and switch on the station.
3.
a control tone is heard, C is displayed briefly.
4.
the display shows: ---
5.
the current password can be entered and confirmed with the rotary control
and the
▲
/
▼
keys.
Confirm the input:
▲
/
▼
press simultaneously.