ITEM#
DESCRIPTION
QDID224
Insta-Dam 2in x 2in x 4ft
THE NEXT GENERATION IN FLOOD PROTECTION
TM
Visit us at www.quickdams.com
or call 888-761-4405
QD_P
rod_Flyer_Indoor_Flood_C
ontr
ol _20190114
Solutions for:
INSTRUCTIONS
1. Clean surface where you will place the Dam to ensure a tight seal
(Debris can reduce the quality of the seal, a smooth surface is best)
2. Lay in position to control & divert fluids
3. When finished, wash Insta-Dam with warm, soapy water
4. Dry with a clean towel, cloth or wiper before storing
5. Wrap & store Insta-Dam in its original plastic wrap & slide into supplied
storage tube. Keep in horizontal position and out of direct sunlight
HELPFUL INFO
• Insta-Dam should always be wrapped & stored away in the plastic
wrap, do NOT throw this away
• Regularly inspect to ensure Insta-Dam is in good condition
• Do not let Insta-Dam come in contact with itself for long periods
of time, as it may get stuck together & could cause damage
during separation
• Long term exposure to incompatible liquids could cause
deterioration & reduce its life
• Leaving Insta-Dam on a surface for a long period of time, could
cause it to stick to the surface. This could cause damage when
trying to remove
• Lift slowly & look for sticking & stretching. If that occurs, use a
putty knife to help loosen Insta-Dam from surface & prevent
damage to product
CARE OF URETHANE PRODUCTS
• Always keep product wrapped in original plastic wrap to avoid it
sticking to itself & other objects
• Do not hang the product by one end or drape it over an object,
store flat
• Store the product in a cool, dry place out of direct sunlight
AVOID
• The flexibility & sealing functions diminish at temperatures
below -30°F
• Temperatures above 120°F (49°C)
• Prolonged exposure to excessive (80–100%) humidity
• Prolonged exposure to direct sunlight
Disclaimers: Urethane Notice
Due to the nature of soft urethane, the physical properties may change over time
with exposure to certain environmental conditions like temperature, humidity, & UV
radiation. Typical life expectancy is 5 years. Inspect Insta-Dam regularly be sure it is still
in good condition.
Due to variables beyond our control, ASP cannot guarantee the use & satisfaction of
this product.
Incompatibility:
Hydrogen Peroxide at 30% showed some degradation after 4 hours of contact.
Extend your length of protection by slightly
overlapping Insta-Dams
