Modular System
Modular components can be attached to an existing cart. Pin strips and rails (Fig. A) are required for Flood Gate storage
and sleeve drying. The Stanchion Plate (Fig. B) can be added to organize and store up to 4 stanchions.
Refer to Illus. A for steps below:
Step 1 - Positioning the Flood Gate Support Base
Flood Gate Pin Strips should be positioned “X” amount of space from
the end of the cart. Position 2nd Flood Gate Pin Strips towards the
middle of the cart.
Step 2 - Setting Proper Distance for Flood Gate Pin Strips
Take 2 Flood Gate Rails and slide on supports to determine exact
width. Position at each end.
Step 3 - Attaching Supports to Cart
Once the correct distance apart has been determined, check the
underside of the cart and be sure the hole locations do not interfere
with anything in the undercarriage. If there is interference, adjust
components accordingly.
Step 4 - Securing Components to Cart
With the components in place, drill through with a 1/4in drill. Attach
with 1/4in flat head screws & nuts.
Step 5 - Attaching Stanchion Plate
Align stanchion plate with the posts closest to the handle of cart “X”
distance from edge of cart. Make sure there is no interference with
placement when drilling. Drill through the cart with stanchion plate in
place and attach with 1/4in screws & nuts.
Step 6- Add Remaining Rails
Place remaining rails on Flood Gate Supports.
Fig. A
Flood Gate
Rails x7
Flood Gate Rail
Pin Strips x2
Fig. B
Stanchion Plate
What you need:
• Flathead screw driver
• 20x 1/4in wood screws for
wood cart
• 12x 1/4-20 flat head screws
• 12x 1/4-20 hex nuts
• 12x washers
• 1/4in drill
• Cart - 30in x 60in
• Tape measure
What’s included:
Modular Cart completely assembled
Illus. A
Flood Gate Cart Manual
Specs of Cart:
• 30in x60in
• Capacity to hold a minimum of 300lbs
• Made of non-corrosive aluminum, stainless steel or wood
5.5in: Minimum
distance away from the
edge to accommodate
a 3 way stanchion &
prevent overhang.
11.5in:
Pin Strips
Placement
Distance can vary
to accommodate
structure underneath
Pin
Strips
