Quetec SoftGate, Руководство пользователя

Страница: 37 / 60

37
Chapter 8 Troubleshooting
The following are known issues with the SoftGate:
8.1 Standby/Resume Cycle
During a standby and resume cycle, SoftGate may stop functioning. If this happens,
please restart the computer.
8.2 Connect to SoftGate but can’t access internet
If a client machine connects to the SoftGate, but cannot access the internet, check that
the SoftGate machine has internet access. Run “ipconfig” and make sure that the
SoftGate has two connections, one for the internet and one for the SoftGate.
8.3 Quetec SoftGate Three network modes overview
During installation of the SoftGate, the installation process initiates a network configuration
and discovery routine and sets SoftGate into a mode that is appropriate for your current
network environment. It is important to understand the modes available, and why SoftGate
has defaulted to the particular mode during setup. It is also important to understand these
modes from the perspective that the SoftGate host can be portable AP device that will be
run under varying network conditions.
The following sections describe the basic functionality of SoftGate network modes and
provide an essential foundation for ongoing configuration of SoftGate in a “real-world”
environment.
The three network modes available are:
¾
Access Point Only Mode
¾
Network Bridge Mode
¾
MS ICS Mode (Microsoft Internet Connection Sharing Mode)