17
Figure-3
User can choose the output program from 4 carriers(A, B, C, D) or ASI(E).
For user to turn to refer detailed explanation of terms on this interface
Click this button to apply the default setting of Input 1
Click this button to apply the modified parameters.
Please refer to the
Chapter 5
attached for detailed information.
…..…………………………………….....
NOTE
……..……..……………………………….
The different combination of
Video Format
,
Video Bit-rate
,
Low delay Mode
and
the Resolution
of signal source will have an impact on the latency. Please refer to the
Chapter 6
attached for
Video Status: Green light
indicates the corresponding
source
cables
are properly
connected.
Encoding Status—Green light
indicates the encoding
process is running normally,
which otherwise turn to red.
General Settings
for the input
programs: User can
edit any item listed
as needed.
Program 1
Program 2
Encoder-modulator
User Manual
B-QAM-HDMI-IP-4CH
www.questtel.com