13
frequency setting submenu, users the can press LEFT, RIGHT, UP, and DOWN buttons to adjust the
frequency and confirm by press ENTER button.
RF level
The RF attenuation range is from -30~-10dbm (81~97dbµV) with 0.1db step. After entering this
setting submenu, user can shift UP/DOWN/LEFT/RIGHT key to set the output level and press
ENTER to confirm.
ASI Output:
B-QAM-HDMI-IP-4CH
encoder & modulator (DVB-C Modulating) is with quad-carrier output A,
B, C, D and 1 ASI output E.
Output A:
the ASI output programs are same as carrier output A.
Output B:
the ASI output programs are same as carrier output B.
Output C:
the ASI output programs are same as carrier output C.
Output D:
the ASI output programs are same as carrier output D.
Output E:
the ASI output programs are set separately.
NOTE: The setting principle of “3.2”, “3.3”, and “3.4” are the same with “3.1” explained above.
4)
TS Config
Enter each menu to configure the TS ID and Original Network ID for the 4 carriers and ASI output.
ASI Output
Output A
RF Frequency
750.000 MHz
RF Level
-10.0 dbm
4.1 Output A
4.2 Output B
4.3 Output C
4.4 Output D
4.5 Output E
Encoder-modulator
User Manual
B-QAM-HDMI-IP-4CH
www.questtel.com