Wuhan Questt Asia Technology CO.,LTD
Wuhan Questt Asia Technology Co., Ltd Address:
A7-101, Hangyu building, Wuhan University Sci & Tech Park, East
Lake High-tech Dev. Zone, Wuhan, Hubei, China
Tel: 00862787611146 Fax: 00862759908808 Http://www.questt.com.cn; Email:[email protected]
1
German Technology | Made in China
B. Then the water cooling system will warn:
”Water In”, put the Water In pipe in your drinking
water container, press the red button, the pump start to pull in water in tank inside the
machine. After finishing pull in water, the panel will show normal.
C. Press the green button
“START”,Wait for a few minutes till capacitance charging is finished,
when everything read:
”normal”, it means the welder is ready to use.Select parameters
and set values correctly based on the type of material and make small adjustment
according to the result of test shooting. Sometimes it relies more on operator
’s
experience.
