Page: 8
A5505
Screen House Pro Vehicle Connector Full Instructions
Connection Methods (continued from previous page)
You can connect to your vehicle using various different methods. Some of which are listed below, but
they are all optional. It is best to try a few different methods and find out which is best for you as
each method has its advantages and disadvantages.
Standard Drive away kit
• A standard drive away kit is an optional piece of equipment (purchased separately) that allows you
to disconnect your connector from a channel or wind out canopy without the need to un-peg your
screen house. Drive away kits come in two different sizes : 4 and 6mm. You choose the size closest to
the size of the channel on your vehicle or roll out canopy. Please consult the instructions that came
with your canopy/channel to find our which one you need. To use a drive away kit :
• Take the long double beaded webbing strap from your drive away kit out and slide this into your wind
out canopy or channel.
• Then take the figure of eight section(s) from the kit and feed these onto the other side of the webbing
strap.
• You can then feed the channel on the connector into the other side of the figure of eight sections
which connects your screen house vehicle connector to your vehicle.
TIP : Some drive away kits can be cut down to size, which can make it cleaner and easier to fit the drive away kit as
they can be cut down to exactly the same size as you require, removing any excess which can get in the way. Please
consult the instructions/details that came with your drive away kit to confirm this before cutting.
Fitting - Connection methods
How to fit the vehicle connector.
