Page: 2
Olton
Kettles instructions
Page: 3
Olton
Kettles instructions
Storage
To help keep your product looking newer for longer and prolong the life and use of the product, we
recommend that the product is covered when not in use.
If the product is not going to be used for an extended period (such as a winter period) we
recommend that it is carefully packed away and stored in a clean, dry and free from damp location.
Care and Cleaning Instructions
Never use and harsh or abrasive cleaners or brushes when cleaning this product as the coating or
finish may be damaged when doing so.
Wash with warm soapy water.
If mineral deposits are detected you can minimise these by boiling water on a medium heat with a
small amount of vinegar. Once boiled, repeat a couple of times then clean and rinse.
Hand wash only, not to be washed in a dishwasher.
Using the Kettle
• NOTE
: The kettle can can be used on gas hobs or real flame.
• When used on a real flame take extra precaution as the sides can get hot.
• When used on a real flame take care as the flame can cause discolouration to the kettle
• Fill the kettle with water, then place on heat source and turn on.
• Once the kettle starts whistling turn the heat source off.
• IMPORTANT : On some sources such as gas, the handle can become hot when boiling, if this is
the case simply wait for 30 seconds before touching the handle, or use oven mitts or a similar
cloth.
• Open the spout and pour water where required. IMPORTANT the water coming out of the spout
will be extremely hot so be careful when pouring.
Usage
Details on how to use and look after your product.
