Page: 4
F2024
Hampton Relax instructions
Folding and Unfolding
• Take the chair from the bag and stand the chair upright as shown in image 1. Ensure that the arms
are unlocked (as shown in image 4). Standing at the side of the chair with one hand of the back rest
and one hand on the arm rest push these apart by pushing in opposite directions. If the chair does
not want to open as shown, then the arms of the chair may be pushed too far back and inhibiting
the chair from opening. If this is the case, release the arms by moving them forward and then try
opening the chair again.
• When the chair is open with the legs fully apart (image 3) you can pull the back rest up into the
upright position and lock the arms into position (as shown in the image 5).
• To adjust the recline, set the locks to unlocked (as shown in the image 4), sit in the chair, place your
legs on the bottom bar of the chair and push back also using your legs to pull up (as shown in image
6).
• When folding the chair make sure you unclip the side table and slide it back under the chair first,
then unlock the chair (as shown in image 4), pull arm on the arms rest and pull the back of the chair
forward until the chair is closed, you might then need to fully close the chair by pushing the frame
together. Once done lock the legs (as shown in image 5).
•
You can also follow this process using the QR code below or going directly to the URL :
https://youtu.be/ztAdyTgmKxY
Folding and Unfolding
Details on how to use your product.
