Quest Leisure Products Bahama E0020, Инструкция по эксплуатации

Страница: 4 / 8

Page: 4
E0020 Bahama fan heater instructions
Using the heater
• Plug the heater into a suitable power outlet [observing all the instructions regarding positionin ] and
switch on.
• To use the fan only function: turn the rotary switch to “X”. The fan will blow out air at room temperature.
• If the fan does not operate, the ambient room temperature is cooler than the built-in thermostat ”off”
level. Turn the thermostat dial gradually clockwise and the fan will start blowing.
• To use the machine for heating: Turn the rotary switch to “I” for low heat and “II” for full heat
• Set the level of heat by turning the thermostat dial gradually clockwise for the lowest heat and fully
clockwise for maximum.
• The thermostat will turn the machine off when the selected room heating is achieved, and when the
temperature drops it will turn on again automatically.
• For maximum heat output use “II” with the thermostat turned fully clockwisc.
• To distribute heat evenly around a room, switch on the oscillation function.
• Always ensure there is no object inside, in front of or obstructing the air inlet or outlet as this can
cause damage and failure.
Using the heater
Details on how to use your product.
Heater Functions
Value Function
O Off
X Fan only (no heat)
I Low heat (1000w)
II Maximum heat (2000w)
Thermostat
Turn clockwise to increase the heat
output
Oscillation control
Right Oscillation on
Left Oscillation off