Page: 14
Screen House
and accessories instructions
Optional Extras - Side Walls
How to fit the optional side walls.
You can purchase additional side wall blinds for your screen house (not Pro models as they have
them built in), which attach to the outside of your screen house and give you extra privacy, cover and
protection.
Attaching the optional side wall blinds to the Screen House
• Remove the sidewall(s) from the packaging.
• If the storm strap is attached and pegged on the screen house, remove the storm strap before
attaching the sidewall by un-clipping it.
• Unfold the sidewall. Attach the hook found in each corner of the sidewall to the D ring located on the
screen house at each corner of the side.
• NOTE: The panels are not square so ensure that the sewn line runs horizontally along the bottom
when attaching the sidewall to the screen house.
• When the sidewall is attached to the side carefully pull the pull loop on the screen house though the
centre hole in the sidewall. Once done you can re-attach the storm strap to the pull loop.
• Once the above is down ensure that the velcro tabs are attached all the way around the sidewall.
The sidewall should go underneath the roof flap (the roof flap is only present on a screen house 2016
onwards) to ensure the best possible water run off.
• Repeat for each sidewall you wish to attach.
Removing optional side wall blinds from the Screen House
• If the storm strap is attached and pegged on the screen house, remove the storm strap before
attaching the sidewall by un-clipping it.
• Detach the velcro straps from around the side of the sidewall.
• Un-clip the clip from the D ring located at each corner of the sidewall.
• Remove the sidewall from the screen house and fold and pack away.
