Page: 12
Screen House
and accessories instructions
Folding and Unfolding
Help if you turn your screen house inside out.
Turning your screen house inside out
Unfortunately sometimes accidents can happen and we have seen a small number (1 or 2 a year) of
users can turn their screen house inside out. This usually happens if it is put up without putting the roof
hub on the floor at the first stage as listed in the instructions, but could happen at other times. If this
does happen then you can follow this procedure to help pop it back the correct way.
• Open it up to the best of your ability and you should have at least one panel that should be fine
as shown in image 1. You will not need any tools in order to do this. If you find that you do, then
something else has happened with your screen house.
• Inside you start by undoing all of the Velcro “tabs” holding each of the four poles into place including
the Velcro “tabs” on the central hub system as shown in images 2 and 3
• Pull each of the four poles out of the four corners of the panel as shown in image 4.
• Once this has been achieved you will then be able to twist the hub and poles in the direction required
(please be careful when handling the poles making sure you do not “poke” them through the mesh
screen).
• Then simply reverse the process putting back each pole then securing them in place with the Velcro
“tabs”
