www.questengineering.com.au
Quest Engineering Pty. Ltd.
130 - 140 Melrose Drive, Tullamarine Vic. 3043 Australia
Phone: +61 (03) 8373 6868
Страница 1: ...r then insert the lip of the Spine to grab the casing handle NOTE The 2 x M10 bolts supplied with both the i Spine should replace the previously installed screws in the speaker The M10 bolts are designed with a longer thread which provides increased strength and security to the system Swing it flat on the top of the speaker box Bolt in and secure the Spine using fastener securing compound onto the...
Страница 2: ... bracket as follows 1 Bolt the wall mount assembly without the speaker attached onto the wall 2 Lift the speaker now installed with Spine and hook it onto the wall mount The wall mount is designed to safely support the weight of the box from this point Setting The Angle Of The Cabinet Once the speaker has been mounted correctly the angle at which the speaker will be fixed can be adjusted by fittin...
Страница 3: ... should be taken so as not to expose yourself or other workers to danger with unsafe practices Check to confirm that suspension wires are strong enough correctly terminated and sufficient to carry the total load with at least a 4 1 safety rating The connectors of the suspension wires and belts must be securely linked with those of the speaker or rigging hardware Be sure to use screws supplied with...
Страница 4: ...www questengineering com au Quest Engineering Pty Ltd 130 140 Melrose Drive Tullamarine Vic 3043 Australia Phone 61 03 8373 6868 ...
