QR2 Rigging Installation Guide
Adjusting and Locking Horizontal Pan.
The advantage of the swivelling assembly is the ability to set the pan angle from -75˚ to +75˚. The
cabinet can be locked in position by tightening the screw located on top of the pivot axis of the rigging
assembly.
Turn the Cabinet
1
Tighten the top screw
2
Mounting the Speaker to the Wall
Bracket
Once the spine has been installed, mount to the wall bracket as follows:
1. Bolt the wall mount assembly (without the speaker attached) onto the wall.
2. Lift the speaker (now installed with Spine) and hook it onto the wall-mount. The
wall-mount is designed to safely support the weight of the box from this point.
Setting The Angle Of The Cabinet
Once the speaker has been mounted correctly, the angle at which
the speaker will be fixed can be adjusted by fitting the Q-Pin into the
correct hole. The standard kit offers the possibility to wall or beam
mount a speaker at -5 to -30 degrees. (Maximum angle of tilt can vary
according to installation environment).
0 degrees
7.5 degrees
