QR2 Rigging Installation Guide
QR2: Pan/Tilt Wall Mounting System
Order Ref: ACHPI-QR2
Kit Contents
• Wall-Mount assembly (swivelling)
• i-Spine
• Quick pin 8x50
• Screws (2x M10)
Installing the i-Spine
Remove the 2 top screws
that are installed in the
speaker then insert the lip
of the Spine to grab the
casing handle.
NOTE: The 2 x M10 bolts supplied with both the i-Spine should replace the previously installed screws in the speaker.
The M10 bolts are designed with a longer thread which provides increased strength and security to the system.
Swing it flat on the top of
the speaker box.
Bolt in and secure the Spine
(using fastener securing
compound) onto the
speaker with the 2 x M10
bolts included.
2
1
3
