2
3
1. IMPORTANT NOTES
2. WATER QUALITY
3. INSTALLATION
3.1. LOCATION
3.2. OPENING THE UNIT
3.3. MINIMUM CLEARANCE
3.4. MOUNTING
3.5. WATER SUPPLY CONNECTION
3.6. VENT/OVERFLOW CONNECTION
3.7. DRAIN CONNECTION
3.8. TAP OUTLET
3.9. ELECTRICAL REQUIREMENTS
4. OPERATION
4.1. MODE 1 OPERATION
4.2. MODE 2 OPERATION
4.3. MODE 3 OPEARTION
4.4. DIMENSION SPECIFICATION TABLE
4.5. DIMENSION SPECIFICATION FOR 2.5L, 5L, 7.5, 10L, 15L, 25L
4.6. SPECIFICATIONS
5. TEMPERATURE ADJUSTMENT
6. FAULT FINDING GUIDE
7. SPARE PARTS LIST
8. NOTES
3
3
3
3
4
4
4
4
4
5
5
5
5
5
6
6
6
7
8
9
9
10
11
PAGE
CONTENT
This appliance can be used by chil-
dren aged from 8 years and above
and people with reduced physical,
sensory or mental capabilities or
lack of experience and knowledge
if they have been given supervision
or instruction concerning use of the
appliance in a safe way and
understand the hazards involved.
Children must not play with the ap-
pliance. Cleaning and user mainte-
nance must not be done by children
without supervision.
• If the supply cord is damaged,
it must be replaced by the
manufacturer, its service agent
or similarly qualified person in
order to avoid hazard.
• The new hose sets supplied with
the appliance are to be used
and old hose-sets should not be
reused.
• This appliance is for indoor use
only.
• The appliance has to be installed
in a horizontal position.
1. IMPORTANT NOTES
1.1 The Boiling Water Unit is designed and
manufactured to operate at a maximum in-
coming mains cold water pressure of 3 BAR.
Should the water pressure exceed 3 BAR, an
inline pressure reducing valve must be fitted.
The min. environment temperature is 5°C
and the environment temperature is not
more than 45°C.
Prohibition of outdoor use.
1.2 Please ensure that the mains cold water
supply is connected to the indicated water
inlet connection of the Boiling Water Unit.
(at the base of the solenoid valve) and that
the unit vent connection always has a free
flow of air into and out of the boiling water
chamber.
1.3 The Boiling Water Unit is a simple tech-
nologically advanced electronic automatic
boiling water system and operates different-
ly and more efficiently to other mechanical
systems.
Please familiarise yourself with the filling and
operating modes of this electronic system as
explained on Page 5 and 6 of the Manual.
1.4 The Boiling Water Unit system facilitates
a boiling water temperature adjustment for
different altitude installations. A temper-
ature trim pot is located in the electronic
controller (PCB). Should a temperature
adjustment be necessary, the procedure is
detailed on page 9 of the manual.
1.5 The Boiling Water Unit produces boiling
water and care should be taken at all times
when using it.
2. WATER QUALITY
Caution is suggested if the Boiling Water Unit
is to be connected to a water supply with a
high content of silica of calcium. Water sup-
plies of this nature may be detrimental to the
unit’s operation and may cause the warranty
to become void. Fo. further information
relating to the guidelines of water quality,
contact your local service agent for advice.
3. INSTALLATION
This Boiling Water Unit shall be installed by
a qualified service person. The installation
must comply with the local building regula-
tions and the relevant wiring and plumbing
regulations.
Please read this booklet as it contains important information about the correct
installation and operation of the Boiling Water Unit. Failure to install the Boiling Water
Unit correctly will deem the product warranty void.
Содержание WB-BW-AQ
Страница 1: ...INSTANT BOILING WATER DISPENSER Installation Guide Owner s Manual WB BW AQ ...
Страница 6: ...10 11 7 SPARE PARTS LIST 8 NOTES ...
Страница 7: ......