Installing batteries
1. Unscrew the head of flashlight (shown in figure above)
2. Remove the battery housing compartment
3. Insert 3 x AAA batteries into the battery compartment according to the polarity
markings in side the batteries housing. (Spring from compartment is negative
side). Never use batteries that are corroded.
4. Insert the battery housing compartment back into the flashlight. Follow the
arrows on the battery housing compartment for proper insertion
5. Screw the head of flashlight back
Flashlight usage
1. Press the On/Off Button to cycle through the following modes:
- 1st Push turns on high LED
- 2nd Push turns on low LED
- 3rd Push turns on flashing LED light
-4th Push turns off LED
2. Pull up on the torch head to zoom the light beam
3. Zoom out to x2000 or Zoom in to x1
4. Emergency alarm - press for 3 seconds to turn on and once to turn off
Multi-function Tools flashlight
Item Number: 137062
USER MANUAL
Diameter: 43 mm
Length: 180 mm
Weight: 200 g
Warning:
1. This item is NOT a toy. Keep away from children
2. Contains sharp knives. Always use caution when using sharp blade objects
3. Do not mix used batteries with new batteries or mix alkaline, standard (carbon-zinc) or rechargeable (nickel-
cadmium) batteries together.
4. Insert the batteries observing the proper polarity (+/-) as indicated.
5. Remove the batteries if the product will not be used for an extended period.
6. Always dispose/recycle batteries in compliance with all applicable laws.
7. Never shine the light directly into your own or other eyes.
Parts:
(1) Knife
(2) Small blade screwdriver
(3) Can & Bottle opener
(4) Scissors
(5) Small Phillips screwdriver
(6) Blade screwdriver
(7) 6mm and 7mm hex wrench
(8) Glass breaker
(9) Glass breaker release switch
(10) Seat belt cutter blade
(11) Head telescopic lens
(12) High-power LED
(13) Fl Signal flasher
(14) On / Off / Alarm button
(1)
(2)
(4)
(5)
(6)
(7)
(8)
(9)
(10)
(14)
(11)
(13)
(12)
Remove
for battery
compartment
(3)
