GSM/GPRS/GNSS Module Series
MC60-TE-A User Guide
MC60-TE-A_User_Guide Confidential / Released 16 / 25
Figure 9: S101/S102 Switch Status on UART3 When Communicating with GSM Part
(2) Open the QCOM (AT command window) on PC. Set appropriate Baud Rate (such as 115200bps) and
COM number which can be checked by the Device Manager on PC.
(3) Connect the antenna to the GSM_ANT on MC60-TE-A with an RF cable.
(4) Insert SIM card into the SIM card socket.
(5) Insert earphone or handset into audio interface.
(6) For power on procedure,
please refer to
document [4]
.
(7) After waiting for 2~3 seconds, customers
should first input “AT” or “at” string once or more until
receiving “OK” from the module in the HyperTerminal.
The module is set to autobauding mode in default configuration. This operation is to synchronize the
baud rate between the computer and the module.
(8) Input AT command and the module will execute its corresponding functions.
Quectel
Confidential
