![background image](http://html1.mh-extra.com/html/quectel/m10/m10_hardware-design_3585698058.webp)
M10 Hardware Design
M10_HD_V3.0
- 57 -
KBR4
KBR3
KBR2
KBR1
KBR0
KBC0
KBC1
KBC2
KBC3
KBC4
Module
GPIO1_KBC5
Figure 37
: Reference circuit of the keypad interface
If a 5*5 matrix does not provide enough keys, GPIO1 could be multiplexed as KBC5 to configure
a 5*6 keypad matrix. Then, the keypad interface consists of 5 keypad row outputs and 6 keypad
column inputs. The basic configuration is 5 keypad rows and 6 keypad columns, giving 30 keys.
Note: This function is not supported in the default firmware.
3.12. ADC
The module provides two auxiliary ADC interfaces to measure the values of two analog inputs.
AT command “AT+QADC?” is used to read the voltage value present on ADC0 pin. AT
command “AT+QEADC?” is used to read the voltage value present on ADC1 pin. For details of
this AT command, please refer to
document [1]
.
Table 18: Pin definition of the ADC
Name
Pin
Function
ADC0
41
Analog to digital converter.
ADC1
40
Analog to digital converter
Содержание M10
Страница 1: ...M10 Quectel Cellular Engine Hardware Design M10_HD_V3 0...
Страница 9: ...M10 Hardware Design M10_HD_V3 0 8 7 Deleted the content of charging function...
Страница 68: ...M10 Hardware Design M10_HD_V3 0 67 Figure 47 Recommendation of RF pad welding...
Страница 76: ...M10 Hardware Design M10_HD_V3 0 75 6 2 Footprint of recommendation single pad...