GNSS Module Series
LC76F_EVB_User_Guide 17 / 26
5
Test via QGNSS Tool
This chapter explains how to use the QGNSS tool for verifying the status of GNSS module.
For more
information about QGNSS usage, see
document [2]
Download the QGNSS tool from our website
Download Zone or request it from Quectel Technical Support.
5.1.
QGNSS Setting
Step 1:
Assemble the EVB components.
Step 2:
Flip the power switch (S201) to
ON
position to power on the EVB and flip the UART↔USB switch
(S301) to
USB
position.
Step 3:
Start the QGNSS and click “
Setting
” and “
Serial Port Configuration
” (default baud rate
9600 bps
2
), as shown in the figure below.
2
UART interface default settings may vary depending on software versions.
