LTE Module Series
BG96 Hardware Design
BG96_Hardware_Design 27 / 78
Driving the host DTR to low level will wake up the module.
When BG96 has URC to report, RI signal will wake up the host. Please refer to
Chapter 3.14
for
details about RI behavior.
AP_READY will detect the sleep state of the host (can be configured to high level or low level
detection). Please refer to
AT+QCFG=“apready”
command for details.
AT+QCFG=“apready”
command is under development.
3.5. Power Supply
3.5.1. Power Supply Pins
BG96 provides the following four VBAT pins for connection with an external power supply. There are two
separate voltage domains for VBAT.
Two VBAT_RF pins for module
’s RF part.
Two VBAT_BB pins for module
’s baseband part.
The following table shows the details of VBAT pins and ground pins.
Table 6: VBAT and GND Pins
Pin Name
Pin No.
Description
Min.
Typ.
Max.
Unit
VBAT_RF
52, 53
Power supply for
module
’s RF part
3.3
3.8
4.3
V
VBAT_BB
32, 33
Power supply for
module
’s baseband part
3.3
3.8
4.3
V
GND
3, 31, 48, 50, 54,
55, 58, 59, 61, 62,
67~74, 79~82,
89~91, 100~102
Ground
-
-
-
-
3.5.2. Decrease Voltage Drop
The power supply range of the module is from 3.3V to 4.3V. Please make sure that the input voltage will
never drop below 3.3V.
NOTE
