Quectel AF50T Скачать руководство пользователя страница 48

Страница: 48 / 55

Wi-Fi&BT Module Series

AF50T Hardware Design

AF50T_Hardware_Design 47 / 52

Storage, Manufacturing and

Packaging

6.1. Storage

The module is provided with vacuum-sealed packaging. MSL of the module is rated as 3. The storage

requirements are shown below.

1. Recommended Storage Condition: The temperature should be 23 ±5 °C and the relative humidity

should be 35 %–60 %.

2. The storage life (in vacuum-sealed packaging) is 12 months in Recommended Storage Condition.

3. The floor life of the module is 168 hours

in a plant where the temperature is 23 ±5 °C and relative

humidity is below 60 %. After the vacuum-sealed packaging is removed, the module must be

processed in reflow soldering or other high-temperature operations within 168 hours. Otherwise, the

module should be stored in an environment where the relative humidity is less than 10 % (e.g. a

drying cabinet).

4. The module should be pre-baked to avoid blistering, cracks and inner-layer separation in PCB under

the following circumstances:



The module is not stored in Recommended Storage Condition;



Violation of the third requirement above occurs;



Vacuum-sealed packaging is broken, or the packaging has been removed for over 24 hours;



Before module repairing.

5. If needed, the pre-baking should follow the requirements below:



The module should be baked for 8 hours at 120 ±5 °C;



All modules must be soldered to PCB within 24 hours after the baking, otherwise they should be

put in a dry environment such as in a drying oven.

Содержание AF50T
























































Результаты поиска

Содержание AF50T

Отзывы:

Похожие инструкции для AF50T

Бренды по названию

Популярные бренды

Quectel AF50T, Проектирование аппаратного обеспечения

Результаты поиска

Содержание AF50T

Отзывы:

Похожие инструкции для AF50T

Бренды по названию

Популярные бренды