GV35 User manual
TRACGV35UM001
- 12 -
Place the cover on the bottom in the position as shown in the following figure. Slide the
cover follow the direction of the arrow until it snapped.
3.3.
Installing a SIM Card
Open the case and ensure the unit is not powered (unplug the 6Pin cable and switch the
internal battery to off position). Slide the holder right to open the SIM card. Insert the SIM
card into the holder as shown below with the gold-colored contact area facing down taking
care to align the cut mark. Close the SIM card holder. Close the case.
Figure 5.
SIM Card Installation
3.4.
Power Connection
PWR (PIN4) / GND (PIN1) are the power input pins. The input voltage range for this
device is from 9V to 16V. The device is designed to be installed in vehicles that operate on
12V systems without the need for external transformers.
Figure 6.
Typical Power Connection
